Reliance LLDPE Slip Heavy Duty 0.9 MFI F19010 is based on Linear Low-Density Polyethylene (LLDPE), with optimum levels of antioxidants. The grades are designed for blown film applications. They have excellent drawdown characteristics with very good impact strength and tear resistance.
Typical Characteristics
| Property | Test Method | Unit | Typical Value* * |
| Density (23 o C) | ASTM D 1505 | g/cc | 0.918 |
| Melt Flow Index (190 C / 2.16 Kg) | ASTM D 1238 | g/10 min. | 1 |
| Film Properties** | |||
| Tensile Strength at Yield (MD / TD) | ASTM D 882 | MPa | 12.5 / 12.0 |
| Ultimate Tensile Strength (MD / TD) | ASTM D 882 | MPa | 38.0 / 30.0 |
| Elongation at Break (MD / TD) | ASTM D 882 | % | 700 / 800 |
| Dart Impact Strength, F50 (38 mm dart, 66 cm height) | ASTM D 1709 | g/ mic. | 3.5 |
| Haze | ASTM D 1003 | % | 14 |
| Tear Strength (MD / TD) | ASTM D 1922 | g/μm | 3.3 / 10.3 |
- Typical characteristics and not to be taken as specifications
- Typical properties measured on 40 μm film made with 1.8 mm die gap & 2.50 BUR on F18010.
Applications
- Mono & Multilayer Blown films for liner bags, lamination films, films for liquid packaging and consumer.
- Non Slip & Anti block grades for Stretch Cling films, Lamination & Protection films
Regulatory Information
- Meets the requirement stipulated in standard IS: 10146 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceutical, and drinking water”. It also conforms to the positive list of constituents as prescribed in IS: 10141. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177,1520, Olefin polymers
Storage Recommendations
- Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
