Reliance HDPE Film Extrusion 0.3 MFI F46003 is a High-Density Polyethylene grade suitable for general purpose blown film applications. The resin offers good melt strength, ESCR and Impact Resistance.
Typical Characteristics:
| Property | Test Method | Unit | Typical Value* * |
| Melt Flow Index (190 C/2.16 kg) | ASTM D 1238 | gm/10 min | 1 |
| Density 23 C | ASTM D 1505 | g/cc | 0.953 |
| Tensile Strength at Yield (MD/TD) | ASTM D 882 | Mpa | 29/26 |
| Ultimate Tensile Strength (MD/TD) | ASTM D 882 | Mpa | 45/40 |
| Elongation @ Break (MD/TD) | ASTM D 882 | % | 780/950 |
| Dart Impact Strength, F50 (38mm Dart, 66 cm Height) | ASTM D 1709 | g/μm | 2 |
| Tear Strength (MD/TD) | ASTM D 1922 | g/μm | 0.40 / 0.45 |
Applications:
- Used for Producing Blown Film and is recommended for use in carrying bags and co-extruded film structures.
Regulatory Information:
- Meets the requirement stipulated in standard IS: 10146 on “Specification for Polyethylene for safe use in contact with foodstuffs, pharmaceuticals, and drinking water”. It also conforms to a positive list of constituents as prescribed in IS: 10141. The grade and the additives incorporated in it also comply with the FDA: CFR Title 21.177.1520, Olefin polymers.
Storage Recommendations:
- Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
