Our PVC profile extrusion line is offered in various models having different values of minimum, maximum pipe OD (mm), max plasticizing capacity (kg/hr) and screw speed variation (rpm).
Salient Features:
- Barrier design (Double thread) Screw for PVC Profile for consistent melt homogeneity, excellent process control and stability for uncompromising end-product quality.
- Broad range of extruders with screw diameters from 20mm to 150mm.
- Designed to process all pelletized materials.
- Output rate for polyolefins up to 450 Kg/hr.
Parts of single screws extruder :
Die Head
- Die head for smaller sizes of pipe ranges from 16mm – 50 mm with stainless steel spider.
- Die head for bigger sizes of pipe ranges from 40mm – 160mm with stainless steel spider.
Cooling unit
- Vacuum tank for smaller sizes of pipe ranges from 16mm – 50mm for better control and proper sizing of the pipe.
- Water tank with sprays and without sprays for cooling of the pipe.
Caterpuller
- Drive is given through separate geared motor for both the rollers of the haul off.
- It prevents wrinkles on pipe and give smooth flow of the pipe.
Cutting Saw
- Fitted with pneumatic cylinder for proper gripping.
- Limit switch is provided to sense the preset length of the pipe.
Tipping Chute
- Fitted with pneumatic cylinder for proper gripping.
- Limit switch is provided to sense the preset length of the pipe.
| MACHINE MODELS | HPMC 65 | HPMC 75 | HPMC 90 |
| Min Pipe OD ( mm) | 16 | 40 | 63 |
| Max Pipe OD (mm) | 50 | 110 | 160 |
| Max Plasticizing Capacity (Kg/hr) | 50 | 80 | 120 |
| Max Output (Kg/hr) | 40 | 60 | 90 |
| Main Drive (Kw) | 11 | 15 | 22.5 |
| Heating | |||
| Barrel ( Kw) | 8 | 12 | 15 |
| Die ( Kw) | 2 | 5 | 5 |
| Screw Speed Variation(RPM) | 15 – 45 | 15 – 45 | 15 – 45 |
| Vacuum Sizing Tank | |||
| Pump Drive ( KW) | 0.75 | – | – |
| Length ( Mtrs) | 2.0 | – | – |
| Water Circulating Requirement( Ltrs/min) | 450 | – | – |
| Cooling Tanks | |||
| Length ( Liters) | – | 3 | 4 |
| Water Circulating Requirement ( Ltrs/Min) | – | 450 | 500 |
| Haul Off | |||
| Drive Range (KW) | 0.75 | 1.5 | 1.5 |
| Pulling Speed(mts/min)Range 1 | 0.735 to 1.147 | 0.4 to 2.0 | 0.4 to 2.0 |
| Pulling Speed(mts/min) Range 2 | 0.71 to 3.55 | 1.4 to 7.2 | 1.4 to 7.2 |
| Cutting Saw | |||
| Saw Diameter ( mm) | 300 | 400 | 500 |
| Saw Drive Load ( KW) | 0.75/2800 | 0.75/2800 | 0.75/2800 |
Applications
There are four application in profile:
For Example
- Bath Doors
- Windows
- Office Sealing
- Interior Partition and decorating
