These are blown film grades and can be extruded with considerable ease.Reliance LDPE Film Extrusion 4 MFI 24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film.
- 24FS040- with Slip additive.
- 24FA040- without Slip additive
Typical Characteristics
| Property | Test Method | Unit | Typical Value |
| Density (23 C) | ASTM D 792 | g/cc | 0.922 |
| Melt Flow Index (190oC / 2.16 Kg) | ASTM D 1238 | g/10 min. | 4 |
| Tensile Strength at Break (MD/TD) | ASTM D 882 | MPa | 18/16 |
| Elongation at Break (MD/TD) | ASTM D 882 | % | 250/400 |
| Dart Impact Strength (F 50 ) | ASTM D 1709/A | g/mic. | 2 |
- Typical characteristics and not to be taken as specifications
- Typical properties measured on 40 μm film made with 1.8 mm die gap & 2.5 BUR.
Applications:
- High slip grade for shopping bags, general purpose packaging. Non Slip grade can be used for Lamination and bubble wrap applications.
Regulatory Information
- Meets the requirement stipulated in standard IS: 10146 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceutical, and drinking water”. It also conforms to the positive list of constituents as prescribed in IS: 10141. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177,1520, Olefin polymers
Storage Recommendations
- Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
