Reliance LDPE Lamination 7 MFI 1070LA17 is an extrusion coating grade low density polyethylene (LDPE) produced by high pressure autoclave process. This grade is specially developed for extrusion coating on different substrates and contains no additives.It exhibites excellent drawdown characteristics maintaing good adhesion, with very low neck-in even at high line speeds. It can also be easily processed into thin gauge films for adhesive lamination and heat and pressure lamination.
Typical Characteristics
| Property | Test Method | Unit | Typical Value |
| Melt Flow Index (190 o C / 2.16 Kg) | ASTM D 1238 | Gm/10 min | 7 |
| Density ( 23 C) | ASTM D 1505 | gm/cm | 0.917 |
| Tensile Strength at Break (MD / TD) | ASTM D 882 | Mpa | 18/15 |
| Elongation at Break (MD / TD) | ASTM D 882 | % | 250/400 |
- Typical Characteristic and not to be taken as specifications
Application:
Extrusion coating, heat & pressure lamination film.
Regulatory Information:
Meets the requirement stipulated in standard IS: 10146 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceutical, and drinking water”. It also conforms to the positive list of constituents as prescribed in IS: 10141. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177,1520, Olefin polymers
Storage Recommendations
- Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
